The up and down axis labels are first psi or vac then grams/rev. These are approximate values only, actual values depend on air temp and barometric pressure. As you can see the top most row only goes up to 10 psi. This means when ever your running over 10 psi only the top row is being used. This means the top row is very important when optimizing the fuel map.
первый столбец, давление в psi. приблизительно.
Добавлено через 8 часов 8 минут
в мануале на 4г63 из фака есть параметры сток валов, но это атмо валы, судя по степени сжатия 10 оттуда же)
где бы найти на турбо?