[ckeins]

I don't know if my Google Translator is right, but if you're looking for the part numbers here, I can help you out.

To run this brake on a 2G, you need:

Outlander brake calipers: MR370775 + MR370776
Outlander brake caliper bridges: MR307282 (2x)
Outlander rotors: MR205215 (2x)
Outlander brake pads: MN116923
"squeak plates": X3511103
clipses: X3511203

This brake is the same as the the "gravel brake" from the Lancer Evolution IV. It's the 296mm. If you want to run it on a 1G, you can use late 1G AWD or Mitsubishi Sigma calipers, because the Outlanders brake calipers have the 2G style fittings and don't fit plug & play on the 1G brake lines. If you have a 1G with ABS, you need to customize the rotors in order to fit properly. On non-ABS 1Gs, this brake fits plug and play (with late 1G AWD calipers).

I hope this helped.

Добавлено через 43 минуты
As I see, that you're running a 3G, you can think about running the Evo-Brembos with the late EA0-VR4 knuckles.