Цитата:
Originally Posted by Bmxr152 View Post
Im doing Evo 9 pistons on 1g rods. The question is how much PTW clearance should i run. I know its a forged piston, so should i run it similar to say wiesco or JE? Im still waiting on my order that i placed from dsmgraveyard on the 3rd of the month, hopefully i receive it soon as my machinist is waiting. Anyone with an evo 9 internal setup please chime in,
|
Цитата:
|
.0016 inches. suposively your safe to run a bit over if you want. i have built 2 engines that had the 6-bolt evo-9 piston setup and all are still running perfect. one is a 15psi DD and the other is running 23psi on race gas. never had a problem. the valve reliefs are backwards to your oem pistons. the dots on the evo-9 piston head needs to face the timing belt. the piston is offset .040.
|
смещение пальца ево8 1мм, ставить по цековкам неправильно, надо ставить по меткам (точки в сторону грм)
еще:
http://www.thedsmgraveyard.com/product_p/n1110b076.htm
http://www.dsmtuners.com/forums/newb...#post151642971