[FET]

Double MAF Hz For Datalogging: All of the information that is transferred to a datalogger is stored in one-byte segments. As such, every feature has a limited range and resolution. With the standard resolution of about 6 Hz, the MAF Frequency is limited to a peak of 1606Hz on the datalogger, which most people are able to max out with ease. As such, there is not a good way to view airflow beyond this point.

By slightly changing the code that stores the MAF Hz value to be datalogged, the chip can make it so that the value on the logger is half of the true MAF Hz. This will double the operational range to about 3200 Hz maximum, while still having a perfectly acceptable resolution of approximately 12 Hz.

или я всетаки ошибаюсь и это просто логгер не видит больше 3200?

Добавлено через 37 секунд
углы точно нет возможности править на данный момент