Цитата:
Сообщение от SkyStar
Мужики, подскажите тогда другое. Я как понял, вариантов строкеров много. Вот хочу оставить сток колено. Есть какой-то вариант строкера на сток колене?
|
можно
замена поршней и шатунов
Добавлено через 5 минут
2.0 Long Rod (4g63)
Standard Specs:
Stroke: 88mm
Factory Bore: 85mm
Rod Length: 156mm
Wrist Pin Height: 1.130"
Displacement: 1997cc or 2.0L
Rod/Stroke Ratio: 1.77
Piston Speed @ 1,000RPM: 9.62 FPS
Pro's: Same as the standard 63, except higher rod ratio and lower rod angle which means more reliability at high RPM's.
Con's: Same as the standard 63. There's no increase in displacement so spool is normal.
Notes: Again, pretty straight forward. It uses stroker pistons to allow for the extra 6mm in rod length.